How to install a Vissani portable air conditioner on a horizontal sliding window Step by Step.
Information: This window installation kit allows the air conditioner installation in most vertical sliding windows (from 18 inches to 50 inches) and wide or horizontal sliding windows (from 18 inches to 50 inches).
When unboxing your unit, simply cut the cords from the box. Then take out the top of the box from the unit. Do not try to carry the unit alone because it is a little heavy. After unboxing it, you can roll where you want because the unit has some wheels.
How to install a portable air conditioner on a horizontal sliding window Step by Step.
Step 1: Window Installation
First, cut the adhesive foam seal to the proper length and attach it to the window sash and frame.
Second, insert the vent panel assembly, including extension panels, in the window opening.
If your window length requires more than two panels, after adjusting the length, Use a pen or pencil to Mark the right limits of the panels.Then
Please secure the panels with rivets.
Third, cut the non-adhesive foam seal to the window width. Stuff the foam seal between the glass and the window to prevent air and insects from entering the room.
Fourth, install the window lock bracket with wood screws as shown if you need them. You may need a drill to install the window lock, which prevents the window from sliding after installation.
Step 2: Prepare the exhaust hose assembly.
Press the flexible exhaust hose into the coupling and the window exhaust adapter. The coupling and window exhaust adapter have an integral clip that snaps onto the hose.
Step 3: Connect the hose to the air conditioner.
Slide the coupling into the slot on the back of the air conditioner to lock the hose on the unit.
Step 4: Connect the hose to the window.
Roll the air to the selected location. Attach the window exhaust adapter to the outer slider section ( the piece with the large exhaust hole).
Step 5: Plug in the Unit
Make sure to use a grounded 3-prong outlet. Do not use an extension cord. Plug the unit.
Step 6: Turn the unit on.
Turn the air conditioner on by pressing the power button and setting the desired mode and temperature using other buttons. Then enjoy the fresh air from your portable air conditioner.
We hope that this video helps you.
Portable Air Conditioner Installation Tips
When purchasing a portable air conditioner, it is essential that you fully understand its installation options and what the unit requires in terms of operation. Some models need windows to vent air; other require drilling holes in walls for refrigerant lines. We can help guide your decision as to which kind of unit best meets your needs.
Portable air conditioners work by rapidly cooling room air before returning it into the room as chilled air. At the same time, they release any hot air left behind during their cooling process via an exhaust hose you install in your window – this hot air must be properly vented so it does not recirculate in your home and create the illusion of cooler conditions than are truly present.
Installing your portable air conditioner should be straightforward using the window kit included with it. This plastic piece fits securely over any window opening and ensures a snug fit of the AC. For windows that don’t conform, consider purchasing cut Plexiglas sheets from local hardware stores – these solutions tend to be more cost effective and work just as effectively!
Installing your portable air conditioner into a wall will require drilling holes into your walls and cutting away parts of the drywall, in addition to needing a drain line to vent water out of your room. Furthermore, several feet of open space is recommended so as to provide sufficient ventilation; direct sunlight can cause an AC unit to overwork itself resulting in reduced lifespan. https://www.youtube.com/embed/mVgnImEUivA
We will put the important links in the description down below.
Thanks for Reading it.
Remember to like, share, comment…
Bye.
