How to Set up HUAYU Universal Remote Control using Manually Search Code (Step by Step).
After you unpack your remote control, you must buy two triple-A batteries for your universal remote because most do not come with batteries. Make sure to know the type of batteries for remote control before buying them.
You open the back of the remote control, put batteries in, and then close it.
How to Set up HUAYU Universal Remote Control using Manually Search Code.
Step 1: Manually turn on your tv to let your tv to be in the normal state play, and point your remote control to the tv.
Step 2. : Press the” SET ” and the “POWER” buttons simultaneity. Then release both buttons together. The red light will remain on. The remote controller will be in the state of search mode.
Step 3: Press and release the “VOLUME+” button; the indicator light will flash once; please pay attention to your TV screen each time you press the “VOLUME+” button.
- If you see the volume symbol appears on your tv screen, stop and press the “SET” button to save it.
- If the volume symbol does not appear, press and release the “VOLUME+” button again until you see the volume symbol appears on your tv screen.
Step 4: Lastly, turn off your TV and turn it back on with the remote control you just programmed, then test the other buttons.
- If they work properly, congratulations, you are done.
- If some buttons do not work properly, you should repeat the procedures from step 1 to step 4 until you find the suitable code for your TV.
If this method does not work, try to program with Auto Search Code.
This Remote is HUAYU Universal Remote; if your remote control is Philips, Magnavox, RCA, GE, or Trisonic, we have some videos on those in our channel. Check through our channel; you should find them.
How to Connect HUAYU Universal Remote Control to TV By Brand Search Code (Step by Step).
After you unpack your remote control, you must buy two triple-A batteries for your universal remote because most do not come with batteries. Make sure to know the type of batteries for remote control before buying them.
You open the back of the remote control, put batteries in, and then close it.
Connect HUAYU Universal Remote Control to TV By Brand Search Code.
Step 1: Manually turn on your tv to let your tv to be in the normal state play, and point your remote control to the tv.
Step 2. : Find the corresponding brand button of your TV on the remote control. For example Samsung = “9”.
Note Information: Most famous brands correspond to the different buttons of the remote control by writing the brand name next to the button.
Step 3: Point your remote control in the front of your TV. Then, press and hold down the corresponding button. The red indicator will start flashing.
Step 4: Please pay attention to your TV screen while holding the corresponding brand button. Then, release the button as soon as the volume symbol appears on your tv screen. The red indicator will turn off and set the code.
If this method does not work, try to program with Auto Search Code.
This Remote is HUAYU Universal Remote; if your remote control is Philips, Magnavox, RCA, GE, or Trisonic, we have some videos on those in our channel. Check through our channel; you should find them.
How to program HUAYU Universal Remote Control to TV with Direct Code Entry (Step by Step).
After you unpack your remote control, you must buy two triple-A batteries for your universal remote because most do not come with batteries. Make sure to know the type of batteries for remote control before buying them.
You open the back of the remote control, put batteries in, and then close it.
How to program HUAYU Universal Remote Control to tv with Direct Code Entry.
Step 1: find your device code in the code list. Write the 3-digit code somewhere. You will need it in step 3.
Step 2. : Press and hold down the” SET ” button of the remote, then press the “POWER” button until the red indicator light turns on. Then release the buttons. The red light will remain on. The remote controller will be in the state of imputing mode.
Step 3: Use your remote’s keypad to enter the 3-digit code of your device’s brand found in Step 1.
After entering the 3-digit code, the red light indicator will turn off. This means that the code has been stored.
Step 4: Lastly, turn on your device with the remote control you just programmed, then test the other buttons.
- They work properly. Congratulations, you are done. You have entered the correct code.
- If some buttons do not work properly, you should try the next code of your device’s brand from the code list because some codes of the brand only have a few functions. You should start from step 1 to step 5.
If this method does not work, try to program with Auto Search Code.
This Remote is HUAYU Universal Remote; if your remote control is Philips, Magnavox, RCA, GE, or Trisonic, we have some videos on those in our channel. Check through our channel; you should find them.
We hope that this article helps you.
We will put the important links in the description down below.
Thanks for reading it.
Remember to like, share, comment…
Bye.
